Honda CBR600RR 2007/08 Helibars - Black ** TRACSTAR BARS FOR CBR600RR 2007/08 **
1 3/4" taller - 5/8" rear offset - 3/4" wider at 25 3/4" (stock is 25") - Black finish
Uses all stock cables and hydraulic lines - Retains factory bar end damper weights
CNC carved from a single 6061 extruded aluminum billet, our newest TracStar Helibar allows optimal placement of controls in a cramped environment. Because there are no handlebar tube mounting clamps attached to the fork tube clamps, the master cylinders and switch gear can be mounted closer to the top triple clamp. This single feature optimizes bar angles, height and width changes.
CLICK HERE or on the image for an additional picture
|
 |
 Honda VFR800 1998-2001 *** NEW AND REVISED! ***
1 1/4" taller
1 1/2" rearward
Retains:
Stock Cables, Hydraulic Lines and Bar Ends
Silver Powder Coat
2008 marks the 20th year of VFR HeliBars® production, and to celebrate this success we have re-engineered and re-styled this icon of sport touring comfort.
First we studied the immense amount of feedback we’ve received from our VFR customers over the years. The height, setback and angles of our current VFR800 HeliBars so perfectly matche the ergonomics of this machine that only a few desire any change at all. What some wished for was the ability to adjust the bars a bit higher. As always, we listened.
For 2008, our new VFR800 HeliBars receive a low profile clamping lug with one 8mm pinch bolt. This slimmer clamp allows the bar to be raised while still providing full clamping pressure on the fork tubes. A new riser tube with a smaller diameter and a thicker cross section was engineered to increase rigidity and strength while reducing the transfer of what little vibration emanates from the V-Four.
|
|
Honda VFR800 2002-08 ** NEW AND REVISED! **
1 1/4" taller
1 1/2" rearward
Retains:
Stock Cables, Hydraulic Lines and Bar Ends
Silver Powder Coat
2008 marks the 20th year of VFR HeliBars® production, and to celebrate this success we have re-engineered and re-styled this icon of sport touring comfort.
Heli said: First we studied the immense amount of feedback we’ve received from our VFR customers over the years. The height, setback and angles of our current VFR800 HeliBars so perfectly matche the ergonomics of this machine that only a few desire any change at all. What some wished for was the ability to adjust the bars a bit higher. As always, we listened.
For 2008, our new VFR800 HeliBars receive a low profile clamping lug with one 8mm pinch bolt. This slimmer clamp allows the bar to be raised while still providing full clamping pressure on the fork tubes. A new riser tube with a smaller diameter and a thicker cross section was engineered to increase rigidity and strength while reducing the transfer of what little vibration emanates from the V-Four.
One of the best features of our new VFR HeliBars is the price. Because of our continued commitment to manufacturing improvement and the addition of new high speed, high precision CNC machines, we are able to offer the new VFR HeliBars without a price increase.
|
|
Honda CBR1000RR 2004/2005 Helibars - Black Helibars in black to suit Honda CBR1000RR 2004/2005
These bars are essentially the same as the 2006/2009 but with additional end damping holes.
We will endeavour to keep these off the shelf depending on demand. Feel free to call our sales team on 01252 870900 to check availability.
- 1 3/4" taller
- 1" rearward
- 27" width
- Black powder coated
- Retains Stock Lines & Cables
CLICK HERE or on the image for an additional picture
|
|
Honda CBR1000RR 2006/2009 ** NEW AND REVISED FOR OCTOBER 2009 **
HeliBars® recently had the pleasure of bringing into their shop a 2008 CBR1000RR for re-design and fitment. While conducting the re-design their engineering staff found a way to re-route cables and lines so that the brake line wouldn't have to be changed out - saving customers money in the long run.
- 1 3/4" taller
- 1" rearward
- 27" width
- Black Powder Coat
- Retains Stock Lines & Cables
CLICK HERE or on the image for an additional picture
|
|
Honda VTR1000 1997-2005 Helibars - Silver *** Currently in re-design, please call 01252 870900 for details ***
1 1/8" Taller - 1/2" Rearward - 1/2" Wider - Retains all stock cables and hydraulic lines
|
|
Honda CBR1100XX 1997-2007 Helibars - Silver ******* BACK BY POPULAR DEMAND *******
** New and re-designed for June 2009 **
The New updated design utilises a more compact low profile fork tube clamp with a 8mm pinch bolt.
Hand Tig welded construction with flawless quality welds.
1 5/8" Taller - 1" Rearward - 1 1/2" Wider (27")
Silver Powder Coat
Direct Replacement, retains stock lines and cables
|
|
Honda ST1300 2003-09 Helibar adaptor - Aluminium 1" taller - 2" rearward - Improved Angles - Retains: Stock Handlebars, Cables, and hydraulic lines
Fits 2003-2009 Models
Heli Modified originally designed and released the ST1300 Tour Performance® Bar Relocation Adapters in the spring of 2003. As it is customary they re-evaluate their design after one or two seasons and found several areas to make improvements to an already excellent design.
Using suggestions and feedback from many of their customers and dealers they set out to incorporate some of these improvements and added several other updates as well.
Thinner Shape
The shape now has a thinner, more angular profile and less `boxy` shape.
Their weight loss program carved 1/4 pound of material out of areas that did not require extra mass for strength. The new shape was part of this weight reduction, no sense in adding needless weight to your motorcycle
CLICK HERE or on the image for an additional picture
|
|
 Honda ST1300 2003-09 Helibars adaptor with GPS mount 1" taller - 2" rearward - Improved Angles - Retains: Stock Handlebars, Cables, and hydraulic lines
Fits 2003-2009 Models
Incorporates threaded mounting hole for Ram mount
Heli Modified originally designed and released the ST1300 Tour Performance® Bar Relocation Adapters in the spring of 2003. As it is customary they re-evaluate their design after one or two seasons and found several areas to make improvements to an already excellent design.
Using suggestions and feedback from many of their customers and dealers they set out to incorporate some of these improvements and added several other updates as well.
Thinner Shape
The shape now has a thinner, more angular profile and less `boxy` shape.
Their weight loss program carved 1/4 pound of material out of areas that did not require extra mass for strength. The new shape was part of this weight reduction, no sense in adding needless weight to your motorcycle
CLICK HERE or on the image for an additional picture
|
|
 Honda ST1300 2003/2009 Helibar adaptor To celebrate their single most successful product to date, HeliBars is proud to introduce the new 3rd Generation ST1300 HRA.
2" Taller (50mm) than stock (1" higher than our original design)
2.5" Rear Offset (62mm) closer to the rider (1/2" additional reduction in reach than our original design)
2 ½ degree reduction in handgrip rearward angle. This single update is the most significant in terms of true long distance comfort because it rotates the rider’s wrist into a more natural position.
Additional update features:
- Larger more ridged rubber anti flex bumpers greatly reduce unwanted handlebar movement.
- Drain holes placed at the bottom of the main mounting bolt counter bores eliminates water from pooling and rusting the hardware.
- Re-designed shape with contoured cover vastly improves appearance fit and function.
- Contoured cut channels position control housing wire looms neatly in place and keeps them from being pinched by the fuel tank at full lock positon.
|
|
 Honda ST1300 2003/2009 Helibar adaptor with GPS mount "G" Version Honda ST1300 2003-2009 complete with ram ball mounting hole.
To celebrate their single most successful product to date, HeliBars is proud to introduce the new 3rd Generation ST1300 HRA.
- 2" Taller (50mm) than stock (1" higher than our original design)
- 2.5" Rear Offset (62mm) closer to the rider (1/2" additional reduction in reach than our original design)
- 2 ½ degree reduction in handgrip rearward angle. This single update is the most significant in terms of true long distance comfort because it rotates the rider’s wrist into a more natural position.
Additional update features:
- Larger more ridged rubber anti flex bumpers greatly reduce unwanted handlebar movement.
- Drain holes placed at the bottom of the main mounting bolt counter bores eliminates water from pooling and rusting the hardware.
- Re-designed shape with contoured cover vastly improves appearance fit and function.
- Contoured cut channels position control housing wire looms neatly in place and keeps them from being pinched by the fuel tank at full lock positon.
|
|
 Honda ST1300 2003/2009 Helibar adaptor w/ram and power socket To celebrate their single most successful product to date, HeliBars is proud to introduce the new 3rd Generation ST1300 HRA.
HeliBars® Pilot® Version with Ram Ball® & Powerlet® Outlet
HeliBars® has always taken advantage of opportunities to improve it’s products, even those as successful as it’s ST1300 Bar Adapter. And successful it has been.
- 2" Taller (50mm) than stock (1” higher than our original design)
- 2.5" Rear Offset (62mm) closer to the rider (1/2” additional reduction in reach than our original design)
- 2 ½ degree reduction in handgrip rearward angle. This single update is the most significant in terms of true long distance comfort because it rotates the rider’s wrist into a more natural position.
Additional update features:
- Larger more ridged rubber anti flex bumpers greatly reduce unwanted handlebar movement
- Drain holes placed at the bottom of the main mounting bolt counter bores eliminates water from pooling and rusting the hardware.
- Re-designed shape with contoured cover vastly improves appearance fit and function.
- Allows easier access to air filter maintenence.
- Contoured cut channels position control housing wire looms neatly in place and keeps them from being pinched by the fuel tank at full lock positon.
- Improved viewing in mirrors.
- Features pre-installed Powerlet Outlet and Ram Mount (wiring harness not included)
|
|
