Bykebitz Motorcycle Accessories Ltd Kawasaki Helibars

*** NEW for February 2009 ***

1 3/4" taller - 25.1/2"width - All stock cables and hydraulics retained
Black anodized satin finish to compliment the ZX10`s frame and triple clamp finish and enhance the look of the New TracStar Helibar.

HeliBars model specific approach has turned out yet another unique TracStar desgined to increase rider comfort while retaining excellent handling characteristics and feedback.

To better support the rider's weight the 20 degree downward angle of the stock clip ons was reduced and rotated up to 6 degrees providing a more neutral wrist position.
- Positioned 1/2" higher at the fork tube, producing a total rise of 1 3/4" ... noticeably more more comfortable yet still sporty.
- Handlebar width increased by 1/2" to 25.5 inches overall.
- Machined from a solid 6061 aluminum billet, the new TracStar is both lightweight and extremely strong.
- Factory damper weights are retained as are all stock cables and hydraulic lines.
- Bar tubes have control housing locating pin holes for proper and accurate assembly.

HeliBars® '08-09 Kawasaki Concours14 and Kawasaki handlebar and riser:
New for 2009 is Heli`s standard updated riser for the rider who wants more comfort without any additional features. With a 2 inch rise their new standard adapter is 1/4 inch taller than their earlier design with a clean appearance and solid function.

The new HeliBar Tour Performance HR adapter offers:
51mm (2") increased handlebar height
19 mm (3/4") rear offset to reduce reach to grips
CNC machined from extruded 6061T6 aluminum
Finished in a silver powder coat
Removes bar and hand distractions in the rearview mirrors due to the bars
and controls being moved up and out of the field of view

Uses all stock cables and hydraulic lines
Complete kit contains everything for installation

For the rider who wants it all Heli have developed their new Pilot handlebar risers. Based on their previous design which accepted a Ram Mount® Ball they have added a Powerlet® socket to the left adapter for a super clean and functional system.

The Pilot model provides a 2 inch rise and makes it easy to mount and power your GPS or other device. The New Heli adapters feature high quality stainless steel hardware and a silver powder coat finish. Increase your touring comfort and keep the great sport bike handling.

The new HeliBar Tour Performance HR adapter offers:

- Removes bar and hand distractions in the rearview mirrors due to the bars
and controls being moved up and out of the field of view
- Left side features the Powerlet® socket for a convenient power source
- Right side bar adapter includes a vertically threaded boss with a 1" Ram Mount® Ball. This single feature simplifies and reduces the cost of mounting a GPS or other electronic device. Road testing dictated this ideal ball mount location which allows easy access to the tank top storage compartment lid. We also recommend a Ram Mount® 6" double socket extension arm, which will place your GPS at the ideal height
- Uses all stock cables and hydraulic lines
- Complete kit contains everything for installation

** Top Seller **
Tour Performance bar relocator riser block
3/4" (20mm) taller - 3/8" (10mm) rear offset
CNC machined from solid billet aluminium - black anodized finish - hardware is supplied - 10 minutes installation.
The cut-outs in the forward sides of the fuel tank / air filter cover and the "wind cheating" fairing left little room for a taller and more offset Heli Bar, so Heli did the next best thing. They raised the factory bars with their Tour Performance handlebar riser.

1 1/2" Taller - 1/2" More Rearward - 1/2" Wider Overall - Retains stock cables, hydraulic lines

NEW for 2008 ZX6R 2007 TracStar™ HeliBars® handlebars

2" (50mm) taller
1" (25mm) rear offset
Stock width at 25 ½"

Introducing the new TracStar clip on HeliBars handlebars. An innovative new design with improved street comfort.
Heli design guru, Harry Eddy, has once again applied his 360º Design approach to produce yet another set of Tracstar handlebars.
CNC carved from a single 6061 extruded aluminum billet, the TracStar clip-ons allow optimal placement of controls in a cramped environment. Because there are no handlebar tube mounting clamps attached to the fork tube clamps, the master cylinders and switch gear can be mounted closer to the top triple clamp. This single feature optimizes bar angles, height and width changes.

One piece seemless design
As always, pre drilled for control housings
A true direct replacement design
Retains factory damper weights
Billet reservoir mount included
Retains all stock cables, hydraulic lines
No modifications to install
Approximately 45 minutes to installation

1 1/2" Taller - 1/2" More Rearward - 1/2" Wider Overall - Retains stock cables, hydraulic lines

2 1/4" Taller - 5/8" More Rearward - 5/8" Wider Overall - wider overall than original design.
Kit includes longer clutch cable, all other stock lines retained

2" taller - 1" rear offset - 27 1/4" width
All stock cables and hydraulics retained
Black Powder Coat finish
These bars will come complete with a set of R&G replacement bar end weights