Honda Stem Mount - Std Kit Honda Stem Mount Standard Kit
A mount that fits the opening in the top of the steering stem.Uses an o-ring shaft that gets progressivly tighter as it is installed. Mounts devices center of bike over the top triple clamp.
Top: Standard 2.25 x 3" (with four sets of mounting holes to allow left, right and centre mounting options. Also has (4) hole AMP
Mount Style: Stem mount FOR HONDA
Shaft Length: 3.5"
Shaft Style: Pivot
Height: 4.25" / 1.0" (from stem nut)
Colours: Black
Kit Includes:
Extra O-ring Posts (13mm,18mm,19mm), Velcro and Allen wrenchs for adjustments.
Suggested uses: GPS, Radar Detectors, Toll Transponder, Cell Phones, Radios, Cameras, Change Holders, Garage Door openers, PDA's
|
 |
Kawasaki Stem Mount - Std Kit Kawasaki StemMount Standard Kit
A mount that fits the opening in the top of the steering stem.Uses an o-ring shaft that gets progressivly tighter as it is installed. Mounts devices center of bike over the top triple clamp.
Top: Standard 2.25 x 3" (with four sets of mounting holes to allow left,right and center mounting options. Also has (4) hole AMP
Mount Style: Stem Mount FOR KAWASAKI
Shaft Length: 3.5"
Shaft Style: Pivot
Height: 4.25" / 1.0" (from stem nut)
Colours: Black
Kit Includes:
Extra O-ring Posts (13mm,16mm,17mm), Velcro and Allen wrenchs for adjustments.
Suggested uses: GPS, Radar Detectors, Toll Transponder, Cell Phones, Radios, Cameras, Change Holders, Garage Door openers, PDA's
Part Number: W08-10102
|
|
Suzuki Stem Mount - Std Kit Suzuki StemMount Standard Kit
A mount that fits the opening in the top of the steering stem.Uses an o-ring shaft that gets progressivly tighter as it is installed. Mounts devices center of bike over the top triple clamp.
Top: Standard 2.25 x 3" (with four sets of mounting holes to allow left,right and center mounting options.Also has (4) hole AMP
Mount Style: Stem Mount FOR SUZUKI
Shaft Length: 3.5"
Shaft Style: Pivot
Height: 4.25" / 1.0" (from stem nut)
Colours: Black
Kit Includes:
Extra O-ring Posts (13mm,16mm,17mm), Velcro and Allen wrenchs for adjustments.
Suggested Uses: GPS, Radar Detectors, Toll Transponder, Cell Phones, Radios, Cameras, Change Holders, Garage Door openers, PDA's
|
|
Yamaha Stem Mount - Std Kit Yamaha StemMount Standard Kit
A mount that fits the opening in the top of the steering stem.Uses an o-ring shaft that gets progressivly tighter as it is installed. Mounts devices center of bike over the top triple clamp.
Top: Standard 2.25 x 3" (with four sets of mounting holes to allow left,right and center mounting options.Also has (4) hole AMP
Mount Style: Stem Mount FOR YAHMAHA
Shaft Length: 3.5"
Shaft Style: Pivot
Height: 4.25" / 1.0" (from stem nut)
Colours: Black
Kit Includes:
Extra O-ring Posts (13mm,,17mm), Velcro and Allen wrenches for adjustments.
Suggested Uses: GPS, Radar Detectors, Toll Transponder, Cell Phones, Radios, Cameras, Change Holders, Garage Door openers, PDA's
|
|
27mm Stem Mount Standard (replacement stem nut) Stem Nut replacement
This mount replaces the O.E.M. stem nut with the our custom nut.Mounts devices center over top triple clamp.
Top: Standard 2.25 x 3" (with four sets of mounting holes to allow left,right and center mounting options.
Mount Style: Stem Mount (replacement stem nut)
Shaft Length: 3.5
Shaft Style: Pivot
Height: 4.25" / 1.0" (from stem nut)
Colours: Silver
Notes:
10998 requires 36mm socket wrench to install and re-torque to factory spec.. #31000L will work on left side(all years) / #31000R will work on right side (pre-2004) #31001 will work on the right handlebar on all FJR1300's
Kit Includes:
Velcro + Tools
Suggested Uses: GPS, Radar Detectors, Toll Transponder, Cell Phones, Radios, Cameras, Change Holders, Garage Door openers, PDA's
Click here for additional picture
|
|
