Bykebitz Motorcycle Accessories Ltd Yamaha Helibars

The Tour Performance® Bar Adapters by Heli install beneath your stock bars and raise them 1" (25mm.) By offsetting the bar remount location back, out and rotating the bolt pattern, the hand grips are repositioned 1 3/4" closer to the rider. All stock cables and hydraulic lines are retained. Includes all hardware necessary for installation.
Machined Aluminum

* Super Bike Performance Touring Bike Comfort *

1. 38mm (1 ) rear offset handlebar mounts re-positions the handgrips and controls closer to the rider for greatly improved long distance riding. Stock height has been maintained for a comfortable yet sporty feel.
2. Greatly increased fork rigidity from thicker cross section design. Tighter steering stem- to - bore clearance, and dual 8mm fork tube pinch bolts.
3. Reduced vibrations felt in the hand grips.
4. All stock hydraulic lines, cables and control housing wire looms are retained and provide proper slack when bars are moved from full left to right stops.
5. Two threaded holes located behind the ignition switch are provided to mount one or two ram ball mounts. Additional design provisions have been engineered into the HRT Triple Clamp design for future accessory mounting.

This is one of the most comprehensive and complete designs HeliBars has ever offered. You can enjoy performance and comfort!

1 Rear Offset Handlebar Mount
Sand-cast Finish
CNC Machined from Solid 6061 T6 Extrusion
Instructions with Photos and all Hardware Included - 1 ½ hour installation time

1 5/8" Taller - 1" Rearward - 3/4" Wider - Retains:stock cables and hydraulic lines
Heli Bar shown on left hand side of photo

1 5/8" Taller - 1" Rearward - 3/4" Wider - Retains: stock cables and hydraulic lines. Kit includes 54mm fork tube clamp
PLEASE NOTE:
If you have a YZF R1 LE, please specify that model. The LE model requires a 50MM Fork Tube Clamp, which we will supply with your order.

1 5/8" Taller - 1/2" Rearward - 1/2" Wider
Please note: These bars have a bolt on fixing and do not clamp around the fork tube.

** DISCONTINUED - Limited Stock **.

The MTS (Multi Tour Sport) design offers 3D adjustability to find that "just right" position. This beauty features chrome moly investment castings, seamless tubing and is hand TIG welded by our magic wand artists.
The standard finish is black polyester powder coat. A silver powder coat finish is also available.
1"-3" taller than stock - 0"-2" rear offset - 3D wrist angle adjustability - Maintains stock width 27.5" - Retains all stock cables and hydraulic lines.
Accepts aftermarket damper weights / cruise control

** Special Offer - RRP £249 Now £179 ** SAVE £70